Do you need any prerequisites before learning simulation-driven RF design in ADS?

A basic understanding of circuits and common electronic components is helpful before starting. Prior RF experience can make the material easier, but the course is designed to build practical simulation skills step by step.

What tools, platforms, or methods are used in this course?

The course centers on Keysight ADS, including ADS Momentum for electromagnetic simulation. Learners mainly work with S-parameter analysis and impedance-matching methods using transmission lines and Smith charts.

What specific tasks will you practice or complete in this course?

You practice setting up RF schematics, running DC, AC, and S-parameter simulations, modeling transmission lines, and designing matching networks. You also interpret Smith charts and simulation plots, then refine layouts with electromagnetic validation to check coupling, parasitics, and other high-frequency effects.

RF/Microwave Design - RF Simulation Tools (ADS)

Ce cours n'est pas disponible en Français (France)

Nous sommes actuellement en train de le traduire dans plus de langues.

RF/Microwave Design - RF Simulation Tools (ADS)

Instructeurs : Starweaver

Inclus avec

3 modules

Obtenez un aperçu d'un sujet et apprenez les principes fondamentaux.

niveau Intermédiaire

Expérience recommandée

4 heures à compléter

Planning flexible

Apprenez à votre propre rythme

3 modules

Obtenez un aperçu d'un sujet et apprenez les principes fondamentaux.

niveau Intermédiaire

Expérience recommandée

4 heures à compléter

Planning flexible

Apprenez à votre propre rythme

Ce que vous apprendrez

Perform DC, AC, and S-parameter simulations in Keysight ADS to analyze RF circuit performance.
Analyze transmission lines and design impedance matching networks in ADS using Smith charts and transmission line models.
Configure and validate electromagnetic (EM) simulations in ADS Momentum to predict real-world RF component and system behavior.

Compétences que vous acquerrez

Catégorie : Verification And Validation
Catégorie : Hardware Design
Catégorie : Electrical and Computer Engineering
Catégorie : Electronic Systems
Catégorie : Simulation and Simulation Software
Catégorie : Electrical Engineering
Catégorie : Communication Systems
Catégorie : Electronics Engineering
Catégorie : Telecommunications
Catégorie : Performance Tuning
Catégorie : Schematic Diagrams
Catégorie : Electronics
Catégorie : Simulations

Outils que vous découvrirez

Catégorie : electromagnetics

Détails à connaître

Certificat partageable

Ajouter à votre profil LinkedIn

Récemment mis à jour !

février 2026

Évaluations

1 devoir

Enseigné en Anglais

Découvrez comment les employés des entreprises prestigieuses maîtrisent des compétences recherchées

En savoir plus sur Coursera pour les affaires

logos de Petrobras, TATA, Danone, Capgemini, P&G et L'Oreal

Il y a 3 modules dans ce cours

Modern RF systems—spanning wireless communications, radar, satellites, and emerging 5G/6G technologies—demand precise circuit design and validation. As frequencies rise, traditional circuit intuition becomes unreliable, making advanced simulation essential for predicting real-world behavior before hardware is built.

This course equips learners with practical, industry-ready skills in RF and microwave design using Keysight ADS. Through guided demos and hands-on labs, you will master S-parameter analysis, transmission-line modeling, impedance matching, and electromagnetic (EM) simulation with Momentum. Real engineering scenarios show how coupling, parasitics, and layout effects influence performance, and how ADS enables accurate prediction and optimization. By the end of the course, you will confidently design RF schematics, evaluate matching networks, analyze antennas and filters, and refine layouts through EM-based validation. Whether you are building wireless front-end modules, optimizing radar components, or modeling high-frequency behavior for next-generation systems, this course provides the applied expertise needed to produce manufacturable, professional-grade RF designs.

Master the fundamentals of high-frequency circuit simulation using Keysight ADS, the industry-standard RF simulation tool. Students will learn to navigate the ADS interface, set up RF circuit simulations, understand S-parameters and frequency domain analysis, and interpret simulation results. This foundational module establishes the skills needed to simulate and validate RF circuit performance before physical prototyping, enabling efficient design iteration and optimization.

Inclus

4 vidéos2 lectures1 évaluation par les pairs

4 vidéosTotal 33 minutes

Course Introduction3 minutes
Setting Up Your First ADS Project and RF Schematic6 minutes
Running S-Parameter Simulations and Reading Results in ADS8 minutes
Time-Domain and AC Analysis for RF Circuits in ADS16 minutes

2 lecturesTotal 10 minutes

Welcome to the Course: Course Overview5 minutes
A/RF Circuit Analysis: Simulation Across Frequency Spectrums5 minutes

1 évaluation par les pairsTotal 20 minutes

Hands-On-Learning: Designing a Simple Matching Network in ADS20 minutes

Master transmission line simulation and impedance matching using Keysight ADS. Students will learn transmission line fundamentals, understand impedance concepts and the Smith chart, and design impedance matching networks. This module emphasizes how proper impedance matching ensures signal integrity, maximizes power transfer, and enables optimal RF system performance in wireless communications, radar, and satellite applications.

Inclus

3 vidéos1 lecture1 évaluation par les pairs

3 vidéosTotal 25 minutes

Simulating Transmission Lines with Different Impedances in ADS5 minutes
Advanced Impedance Matching Techniques for Broadband Circuits5 minutes
Smith Chart and Filter Design Applications in ADS15 minutes

1 lectureTotal 5 minutes

Transmission Line Analysis: Cable Health Case Study5 minutes

1 évaluation par les pairsTotal 20 minutes

Hands-On-Learning: Building and Analyzing a Bandpass Filter Circuit20 minutes

Master electromagnetic simulation using Keysight ADS to evaluate component behavior and RF system performance. Students will learn when and why to use EM simulation, understand how to set up 3D electromagnetic simulations, and interpret EM simulation results. This module emphasizes how EM simulation reveals coupling effects, radiation patterns, and component interactions that circuit-level simulation cannot capture, enabling accurate prediction of real-world RF system performance.

Inclus

4 vidéos1 lecture1 devoir2 évaluations par les pairs

4 vidéosTotal 24 minutes

Introduction to Electromagnetic Simulation with Momentum6 minutes
Simulating Antennas and Antenna Arrays with EM Tools7 minutes
Advanced EM Analysis: Coupling and Cross-Talk in Complex Circuits8 minutes
Course Wrap-Up3 minutes

1 lectureTotal 5 minutes

Why RF Engineers Need EM Simulation for Designing RF Circuits5 minutes

1 devoirTotal 20 minutes

RF/Microwave Design - RF Simulation Tools (ADS)20 minutes

2 évaluations par les pairsTotal 80 minutes

Hands-On-Learning: Designing and Optimizing an RF Component with EM Simulation20 minutes
Project: Complete RF Circuit Design Project: From Specification to EM Validation60 minutes

Instructeurs

Starweaver

Coursera

561 Cours1 116 758 apprenants

Offert par

Coursera

En savoir plus sur Design and Product

Coursera
RF/Microwave Design - S-parameter Analysis
Cours
Coursera
RF/Microwave Design - Antenna Design
Cours
Eindhoven University of Technology
RF and millimeter-Wave Circuit Design
Cours
Coursera
RF/Microwave Design - Impedance Matching
Cours

Pour quelles raisons les étudiants sur Coursera nous choisissent-ils pour leur carrière ?

Felipe M.

Étudiant(e) depuis 2018

’Pouvoir suivre des cours à mon rythme à été une expérience extraordinaire. Je peux apprendre chaque fois que mon emploi du temps me le permet et en fonction de mon humeur.’

Jennifer J.

Étudiant(e) depuis 2020

’J'ai directement appliqué les concepts et les compétences que j'ai appris de mes cours à un nouveau projet passionnant au travail.’

Larry W.

Étudiant(e) depuis 2021

’Lorsque j'ai besoin de cours sur des sujets que mon université ne propose pas, Coursera est l'un des meilleurs endroits où se rendre.’

Chaitanya A.

’Apprendre, ce n'est pas seulement s'améliorer dans son travail : c'est bien plus que cela. Coursera me permet d'apprendre sans limites.’

Débloquez l'accès à plus de 10 000 cours grâce à un abonnement
Faites progresser votre carrière avec un diplôme en ligne
Obtenez un diplôme auprès d’universités de renommée mondiale - 100 % en ligne
Rejoignez les 4 700 entreprises internationales qui ont choisi Coursera for Business.

Foire Aux Questions

It means using ADS to predict how RF and microwave circuits will behave before hardware is built, rather than relying on circuit intuition alone. The course focuses on analyzing circuit response, matching, transmission-line behavior, and layout-driven effects as part of a practical design process.

You would use it when a high-frequency design needs to be checked before fabrication, especially when impedance, bandwidth, loss, or layout effects can change performance. In this course, that includes validating matching behavior, transmission-line behavior, and whether a schematic still looks realistic once physical effects are considered.

It sits between the first circuit idea and the final physical implementation, helping you turn a schematic into something you can test and refine with confidence. The course treats it as a repeatable loop of building a design, simulating it, interpreting the results, and updating the circuit or layout.

Instead of finding problems only after hardware is built, simulation-driven design checks matching, gain, transmission-line behavior, and layout effects earlier in the process. In this course, the emphasis is on using simulation to guide design decisions first, then moving into electromagnetic validation when circuit-level results are not enough.